|
|
|
National Stock Number:
5306-00-237-6723
Federal Supply Class:
5306
National Item Identification Number:
002376723
Description:
BOLT,MACHINE
Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.
|
Manufacturer Information:
| 115J565-7 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | AB1634E4H | 02310 | PATTONAIR USA INC |
|
Techincal Specification:
| THREAD DIRECTION | RIGHT-HAND | | FASTENER LENGTH | 0.516 INCHES MINIMUM AND | | 0.561 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | THREAD LENGTH | 0.439 INCHES MINIMUM AND | | 0.514 INCHES MAXIMUM | | HEAD STYLE | UNDERCUT HEXAGON | | THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 20 | | THREAD CLASS | 3A | | SURFACE TREATMENT | PASSIVATE OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | HEAD HEIGHT | 0.180 INCHES NOMINAL | | WIDTH BETWEEN FLATS | 0.490 INCHES MINIMUM AND | | 0.502 INCHES MAXIMUM | | GRIP LENGTH | 0.047 INCHES MINIMUM AND | | 0.077 INCHES MAXIMUM | | FEATURES PROVIDED | FINISHED HEAD | | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING | | SPECIAL FEATURES | FURNISHED WITH ONE SILICONE O-RING AND ONE POLYTETRAFLUOROETHYLENE WASHER | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY PACKAGING WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 02310 | | DESIGN CONTROL REFERENCE | AB1634E4H |
|
|