5306-00-226-4834 BOLT,MACHINE Index 5306-00-226-4836 BOLT,MACHINE

National Stock Number:
5306-00-226-4835

Federal Supply Class:
5306

National Item Identification Number:
002264835

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.


Manufacturer Information:
179828D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
1D4539D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
343665845152OSHKOSH CORP
343665875Q65OSHKOSH DEFENSE LLC
5306002258506A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5306002258506SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
8AX10945152OSHKOSH CORP
B1821BH031C250N80204AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED
FFS8581348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MILB85781349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
5306PL14950419009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
5306PL14950429009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
5306002264835A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5306002264835SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
NASM90725-425B5M3EDGEWOOD CHEMICAL BIOLOGICAL CENTER DIV DEPT OF ARMY
MS90725-4280205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NASM9072580205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS90725-4296906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS90728-4296906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS35295-42K4914DETROIT DIESEL OVERSEAS DISTRIBUTION CORP


Techincal Specification:
FASTENER LENGTH2.406 INCHES MINIMUM AND 2.500 INCHES MAXIMUM
FEATURES PROVIDEDFINISHED HEAD
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
HEAD STYLEHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONAEJ429GRADE8 ASSN STD 15TH MATERIAL RESPONSE OR ASTMA354GRADEBD ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1524 OR STEEL COMP 1527 OR STEEL COMP 1536 OR STEEL COMP 1541 OVERALL
MINIMUM TENSILE STRENGTH150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.312 INCHES
WIDTH BETWEEN FLATS0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
SURFACE FINISH63.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTZINC AND CHROMATE OVERALL
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.875 INCHES MINIMUM AND 1.062 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH18


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us