5306-00-172-7165, BOLT,SHEAR

National Stock Number:
5306-00-172-7165

Federal Supply Class:
5306

National Item Identification Number:
001727165

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

AIC260E5-18	06725	SPS TECHNOLOGIES, LLC
C305-5-18	27624	SPS TECHNOLOGIES LLC
C305-5-18	56878	SPS TECHNOLOGIES, LLC
EWB26-5-18	56878	SPS TECHNOLOGIES, LLC
C305-5-18	81755	LOCKHEED MARTIN CORPORATION
C305-5-18	92215	HOWMET GLOBAL FASTENING SYSTEMS INC
VS2005-5-18	06950	HOWMET GLOBAL FASTENING SYSTEMS INC
EWB26-5-18	80539	SPS TECHNOLOGIES, LLC
VS2005-5-18	92215	HOWMET GLOBAL FASTENING SYSTEMS INC

Techincal Specification:

EXTENDED WASHER DIAMETER	0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.050 INCHES NOMINAL
FASTENER LENGTH	1.721 INCHES MINIMUM AND 1.751 INCHES MAXIMUM
GRIP DIAMETER	0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH	1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM
HARDNESS RATING	51.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.319 INCHES NOMINAL
HEAD STYLE	DOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH	260000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.312 INCHES
SPECIFICATION/STANDARD DATA	56878-EWB26 MANUFACTURERS STANDARD
WIDTH BETWEEN FLATS	0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-8837,TY 2,CL 3 MIL SPEC 1ST TREATMENT RESPONSE OR AMS 2416 ASSN STD 2ND TREATMENT RESPONSE OR AMS 2416 ASSN STD 3RD TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OR NICKEL AND CADMIUM OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.586 INCHES MINIMUM AND 0.636 INCHES MAXIMUM
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial