2910-00-149-1834 BENT TUBE,COPPER Index 5999-00-149-1837 CIRCUIT CARD ASSEMBLY

National Stock Number:
5306-00-149-1835

Federal Supply Class:
5306

National Item Identification Number:
001491835

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.


Manufacturer Information:
51807780020NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2
518077-280020NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2
VEP220555-12-3806710VALLEY-TODECO, INC.
72991-12-3856878SPS TECHNOLOGIES, LLC


Techincal Specification:
EXTENDED WASHER DIAMETER1.220 INCHES MINIMUM AND 1.230 INCHES MAXIMUM
EXTENDED WASHER THICKNESS0.178 INCHES NOMINAL
FASTENER LENGTH3.641 INCHES MINIMUM AND 3.671 INCHES MAXIMUM
FEATURES PROVIDEDFINISHED HEAD
GRIP LENGTH2.365 INCHES MINIMUM AND 2.385 INCHES MAXIMUM
HEAD HEIGHT0.533 INCHES NOMINAL
HEAD STYLEDOUBLE HEXAGON W/HOLE
HOLE CONFIGURATION STYLEHEXAGON LONGITUDINAL HOLE
HOLE DIAMETER0.540 INCHES MINIMUM AND 0.580 INCHES MAXIMUM
HOLE QUANTITY1
HOLE TYPEDRILLED
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALNICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.750 INCHES
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH1.256 INCHES MINIMUM AND 1.306 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH16
WIDTH BETWEEN FLATS0.803 INCHES MINIMUM AND 0.814 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us