5306-00-143-2022, BOLT,SHEAR

5306-00-143-2021 BOLT,SHEAR

5120-00-143-2023 INSERTER,SEAL

National Stock Number:
5306-00-143-2022

Federal Supply Class:
5306

National Item Identification Number:
001432022

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

69342-14-3880

56878

SPS TECHNOLOGIES, LLC

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	4.561 INCHES MINIMUM AND 4.584 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	4.693 INCHES MINIMUM AND 4.723 INCHES MAXIMUM
GRIP DIAMETER	0.8730 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM
GRIP LENGTH	3.870 INCHES MINIMUM AND 3.890 INCHES MAXIMUM
HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.468 INCHES NOMINAL
HEAD STYLE	DOUBLE HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.875 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS	1.239 INCHES MINIMUM AND 1.252 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL
SURFACE TREATMENT	NICKEL AND CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.803 INCHES MINIMUM AND 0.853 INCHES MAXIMUM
THREAD QUANTITY PER INCH	14
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial