5985-00-062-7013 SWITCH,RADIO FREQUENCY TRANSMISS Index 6625-00-062-7015 TEST SET SUBASSEMBLY,ELECTRICAL

National Stock Number:
5306-00-062-7014

Federal Supply Class:
5306

National Item Identification Number:
000627014

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
NAS464P10L2380205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.750 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH1.984 INCHES MINIMUM AND 2.031 INCHES MAXIMUM
GRIP DIAMETER0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM
GRIP LENGTH1.438 INCHES NOMINAL
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.312 INCHES NOMINAL
HEAD STYLEHEXAGON
MATERIALSTEEL COMP 4037 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.625 INCHES
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
SHANK UNTHREADED HOLE DIAMETER0.141 INCHES NOMINAL FIRST HOLE
SINGLE SHEAR STRENGTH29150 POUNDS PER SQUARE INCH
WIDTH BETWEEN FLATS0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.546 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
THREAD QUANTITY PER INCH18
THREAD SERIES DESIGNATORUNF


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us