|
|
|
National Stock Number:
5306-00-006-4599
Federal Supply Class:
5306
National Item Identification Number:
000064599
Description:
BOLT,INTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose external threaded portion is of one nominal diameter. It has a concentric hole along the longitudinal centerline which may extend a part or the full length of the bolt. The concentric hole along the centerline may be counterbored and/or internally threaded at the head end or the bolt end. The head is designed to be held or driven by an external and/or internal driver. For items having a hole(s) perpendicular to the axis which meet the concentric hole along the longitudinal centerline, see BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| A51C43592-19 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51C43592-19 | 61174 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51C43592-19 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| SHOULDER DIAMETER | 0.4995 INCHES MINIMUM AND | | 0.5000 INCHES MAXIMUM | | SHOULDER LENGTH | 1.737 INCHES MINIMUM AND | | 1.747 INCHES MAXIMUM | | CONCENTRIC HOLE DEPTH | 1.620 INCHES NOMINAL | | CONCENTRIC HOLE DIAMETER | 0.249 INCHES MINIMUM AND | | 0.255 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | HEAD HEIGHT | 0.110 INCHES MINIMUM AND | | 0.150 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.740 INCHES MINIMUM AND | | 0.752 INCHES MAXIMUM | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.968 INCHES MINIMUM AND | | 1.978 INCHES MAXIMUM FIRST HOLE | | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND | | 0.116 INCHES MAXIMUM FIRST HOLE | | TEST DATA DOCUMENT | 81349-MIL-I6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 61174 | | DESIGN CONTROL REFERENCE | A51C43592-19 | | THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.247 INCHES MAXIMUM | | FASTENER LENGTH | 2.088 INCHES MINIMUM AND | | 2.098 INCHES MAXIMUM | | MATERIAL | STEEL COMP 410 OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND | | 45.0 ROCKWELL C MAXIMUM OVERALL | | STYLE DESIGNATOR | CONCENTRIC HOLE UNTHREADED |
|
|