| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 1.386 INCHES MINIMUM AND 1.416 INCHES MAXIMUM |
| GRIP DIAMETER | 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM |
| HEAD HEIGHT | 0.068 INCHES NOMINAL |
| HEAD DIAMETER | 0.328 INCHES MINIMUM AND 0.337 INCHES MAXIMUM |
| HEAD STYLE | FLAT COUNTERSUNK |
| INTERNAL DRIVE STYLE | TORX |
| MATERIAL DOCUMENT AND CLASSIFICATION | UNABLE TO DECODE |
| MATERIAL | UNABLE TO DECODE |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, SHEAR,100 DEG FLUSH HEAD, CLOSE TOLEREANCE, SHORT THREAD, NAS1800SIX LOBE RECESS, 95 KSI FSU |
| NOMINAL THREAD DIAMETER | 0.1640 INCHES |
| SINGLE SHEAR STRENGTH | 95000 POUNDS PER SQUARE INCH |
| SPECIFICATION/STANDARD DATA | 80205-NAS5315 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SPLINE MAJOR DIAMETER | 0.155 INCHES NOMINAL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | UNABLE TO DECODE |
| SURFACE TREATMENT | UNABLE TO DECODE |
| THREAD LENGTH | 0.276 INCHES NOMINAL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNJC |