| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| HEAD HEIGHT | 0.045 INCHES MINIMUM |
| HEAD DIAMETER | 0.213 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| HEAD STYLE | FLAT COUNTERSUNK |
| INTERNAL DRIVE STYLE | TORX |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,TENSION,100 DEG FLUSH HEAD,FULL THREAD,NAS1800 SIX LOBE RECESS,SELF-LOCKING AND NON-LOCKING |
| NOMINAL THREAD DIAMETER | 0.1120 INCHES |
| SCREW MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5731,5732,5737 OR 5853 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE |
| SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-416 TYPE II,CLASS 2 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE |
| SCREW MATERIAL | IRON ALLOY 660 |
| SCREW SURFACE TREATMENT | CADMIUM |
| SPECIFICATION/STANDARD DATA | 80205-NAS5312 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SPLINE MAJOR DIAMETER | 0.111 INCHES NOMINAL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.580 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 40 |
| THREAD SERIES DESIGNATOR | UNJC |