| EXTENDED WASHER THICKNESS | 0.112 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| EXTENDED WASHER DIAMETER | 0.993 INCHES MINIMUM AND 1.015 INCHES MAXIMUM |
| FASTENER LENGTH | 1.00 INCHES NOMINAL |
| HEAD HEIGHT | 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM |
| HEAD STYLE | HEXAGON EXTENDED WASHER |
| INTERNAL DRIVE STYLE | W/O INTERNAL DRIVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | UNABLE TO DECODE |
| MATERIAL | UNABLE TO DECODE |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SEMS, HEX CAP SCREW |
| PRIMARY WASHER MATERIAL THICKNESS | 0.112 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| PRIMARY WASHER OUTSIDE DIAMETER | 0.993 INCHES MINIMUM AND 1.015 INCHES MAXIMUM |
| PRIMARY WASHER STYLE | SPRING TENSION |
| NOMINAL THREAD DIAMETER | 0.375 INCHES |
| SPECIFICATION/STANDARD DATA | 05047-ASME B18.24-2020 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | UNABLE TO DECODE |
| SURFACE TREATMENT | UNABLE TO DECODE |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 1.00 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 16 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| WASHER QUANTITY | 1 |
| WIDTH BETWEEN FLATS | 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |