| CHAMFER ANGLE | 30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 4.000 INCHES NOMINAL |
| HEAD DIAMETER | 0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| HEAD HEIGHT | 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| INTERNAL DRIVE STYLE | HEXAGON |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | NICKEL ALLOY 500 OVERALL |
| NOMINAL THREAD DIAMETER | 0.500 INCHES |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR |
| SPECIFICATION/STANDARD DATA | 81349-MIL-DTL-1222J GOVERNMENT SPECIFICATION |
| WIDTH ACROSS FLATS | 0.375 INCHES NOMINAL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 1.250 INCHES MINIMUM |
| THREAD QUANTITY PER INCH | 13 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |