| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 1.105 INCHES MINIMUM AND 1.135 INCHES MAXIMUM |
| GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| GRIP LENGTH | 0.750 INCHES NOMINAL |
| HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD HEIGHT | 0.015 INCHES NOMINAL |
| HEAD DIAMETER | 0.507 INCHES MAXIMUM |
| HEAD STYLE | FLAT FILLISTER |
| INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100.0 DEGREE FLUSH HEAD,TORQ-SET RECESS,132.0 KSI SH |
| MATERIAL | STEEL COMP H11 OVERALL |
| NOMINAL THREAD DIAMETER | 0.250 INCHES |
| SINGLE SHEAR STRENGTH | 132000 POUNDS PER SQUARE INCH |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488 TYPE II,CLASS 3 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-L-46010,TYPE I APPLIED OVER ALUMINUM COATING MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ALUMINUM AND LUBRICANT OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.370 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| THREAD QUANTITY PER INCH | 28 |