| CHAMFER ANGLE | 30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 3.50 INCHES NOMINAL |
| HEAD DIAMETER | 0.921 INCHES MINIMUM AND 0.937 INCHES MAXIMUM |
| HEAD HEIGHT | 0.616 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| INTERNAL DRIVE STYLE | HEXAGON |
| MATERIAL DOCUMENT AND CLASSIFICATION | FF-S-86 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| NOMINAL THREAD DIAMETER | 0.6250 INCHES |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | STEEL,CAP,SOCKET HEAD,UNDRILLED AND DRILLED,PLAIN AND SELF-LOCKING,ALLOY STEEL,CORROSION-RESISTANT STEEL AND HEAT-RESISTANT STEEL,UNRC-3A AND UNRC-2A |
| SPECIFICATION/STANDARD DATA | 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| WIDTH ACROSS FLATS | 0.500 INCHES NOMINAL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-DTL-13924,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | OXIDE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 1.750 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 11 |
| THREAD SERIES DESIGNATOR | UNRC |