| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD DIAMETER | 0.1900 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.363 INCHES NOMINAL |
| FASTENER LENGTH | 0.598 INCHES MINIMUM AND |
| 0.628 INCHES MAXIMUM |
| MATERIAL | IRON ALLOY 660 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5731, AMS5732, AMS5737 OR AMS5853 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-416, TYPE II, CLASS 2 INTERNATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MINIMUM TENSILE STRENGTH | 22 POUNDS PER SQUARE INCH |
| SINGLE SHEAR STRENGTH | 95000 POUNDS PER SQUARE INCH |
| HEAD STYLE | FLAT COUNTERSUNK |
| HEAD DIAMETER | 0.3390 INCHES MINIMUM AND |
| 0.3813 INCHES MAXIMUM |
| HEAD HEIGHT | 0.083 INCHES NOMINAL |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND |
| 101.0 DEGREES MAXIMUM |
| INTERNAL DRIVE STYLE | TORX |
| SPLINE MAJOR DIAMETER | 0.155 INCHES NOMINAL |
| GRIP LENGTH | 0.240 INCHES MINIMUM AND |
| 0.260 INCHES MAXIMUM |
| GRIP DIAMETER | 0.1885 INCHES MINIMUM AND |
| 0.1895 INCHES MAXIMUM |
| SURFACE FINISH | 32.0 MICROINCHES OVERALL |
| SPECIFICATION/STANDARD DATA | 80205-NAS5319 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, SHEAR, 100 DEG FLUSH HEAD, CLOSE TOLERANCE, NAS1800 SIX LOBE RECESS, 95 KSI FSU |