| BEARING SURFACE OF HEAD SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE II, CLASS 2 MIL STD ALL TREATMENT RESPONSES |
| BEARING SURFACE OF HEAD SURFACE TREATMENT | CADMIUM |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 0.6565 INCHES MINIMUM AND 0.6875 INCHES MAXIMUM |
| HEAD HEIGHT | 0.080 INCHES NOMINAL |
| HEAD DIAMETER | 0.371 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| HEAD STYLE | FILLISTER COUNTERSUNK |
| HEAD SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE II, CLASS 2 MIL STD ALL TREATMENT RESPONSES |
| HEAD SURFACE TREATMENT | CADMIUM |
| INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| MINIMUM TENSILE STRENGTH | 3180 POUNDS PER SQUARE INCH |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, MACHINE-FLAT 100 DEG HEAD FULL THREAD, OFFSET CRUCIFORM |
| NOMINAL THREAD DIAMETER | 0.1900 INCHES |
| SCREW MATERIAL DOCUMENT AND CLASSIFICATION | AMS5737 INTERNATIONAL STD/SPEC ALL MATERIAL RESPONSES |
| SCREW MATERIAL | STEEL CORROSION RESISTING |
| SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE II, CLASS 2 MIL STD ALL TREATMENT RESPONSES |
| SCREW SURFACE TREATMENT | CADMIUM |
| SHANK SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE II, CLASS 2 MIL STD ALL TREATMENT RESPONSES |
| SHANK SURFACE TREATMENT | CADMIUM |
| SPECIAL FEATURES | CRES - A286 (UNS S66286) PER AMS5737. HEAT TREAT: CRES - 160000 PSI UTS MIN. AT ROOM TEMP. "E" IN LIEU OF FIRST DASH = CRES A286. "P" FOLLOWING LAST DASH NUMBER = CADMIUM PLATING PER QQ-P-416, TYPE II, CLASS 2. MS33781 OFFSET CRUCIFORM RECESS. |
| SPECIFICATION/STANDARD DATA | 80205-NAS1102 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.0160 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |