| CHAMFER ANGLE | 30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 1.25 INCHES NOMINAL |
| HEAD DIAMETER | 0.176 INCHES MINIMUM AND 0.183 INCHES MAXIMUM |
| HEAD HEIGHT | 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| HOLE DIAMETER | 0.033 INCHES MINIMUM AND 0.039 INCHES MAXIMUM |
| HOLE QUANTITY | 2 |
| HOLE TYPE | DRILLED |
| INTERNAL DRIVE STYLE | HEXAGON |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, CAP, SOCKET HEAD |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.112 INCHES |
| SCREW MATERIAL DOCUMENT AND CLASSIFICATION | AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE |
| SCREW MATERIAL | IRON ALLOY 660 |
| SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| SCREW SURFACE TREATMENT | PASSIVATE |
| SPECIFICATION/STANDARD DATA | 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.750 INCHES MINIMUM |
| THREAD QUANTITY PER INCH | 40 |
| THREAD SERIES DESIGNATOR | UNRC |
| WIDTH ACROSS FLATS | 0.094 INCHES NOMINAL |