|
|
|
National Stock Number:
5305-01-682-0636
Federal Supply Class:
5305
National Item Identification Number:
016820636
Description:
SCREW,CLOSE TOLERANCE
|
Manufacturer Information:
| 121558-4-A9B | 56878 | SPS TECHNOLOGIES, LLC | | 121558-4-A9B | 80539 | SPS TECHNOLOGIES, LLC | | 985B4-9 | 06725 | SPS TECHNOLOGIES, LLC | | AIC985-4-9B | 06725 | SPS TECHNOLOGIES, LLC | | AIC985B4-9 | 06725 | SPS TECHNOLOGIES, LLC | | C7985B4-9 | 06725 | SPS TECHNOLOGIES, LLC | | C7985B4-9 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | C7985B4-9 | 0K6Z0 | SATURN FASTENERS INC | | C7985B4-9 | 27624 | SPS TECHNOLOGIES LLC | | C7985B4-9 | 56878 | SPS TECHNOLOGIES, LLC | | C7985B4-9 | 70236 | TACTAIR FLUID CONTROLS INC | | C7985B4-9 | 72914 | GRIMES AEROSPACE COMPANY | | C7985B4-9 | 80539 | SPS TECHNOLOGIES, LLC | | C7985B4-9 | 81755 | LOCKHEED MARTIN CORPORATION | | VT1694AS4-9 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | SF117B4-9 | 0K6Z0 | SATURN FASTENERS INC | | H185B4-9 | 17446 | HUCK INTERNATIONAL, INC | | PBF1166B4-9 | 27624 | SPS TECHNOLOGIES LLC | | C7985B4-9 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | VT1694AS4-9 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | H185B4-9 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.2500 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.403 INCHES NOMINAL | | FASTENER LENGTH | 0.9655 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-6487 NATIONAL STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ALUMINUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488 TYPE II, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND | | 50.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 4400 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.350 INCHES MINIMUM AND | | 0.399 INCHES MAXIMUM | | HEAD HEIGHT | 0.063 INCHES NOMINAL | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | GRIP LENGTH | 0.5625 INCHES NOMINAL | | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND | | 0.2495 INCHES MAXIMUM | | POINT STYLE | FLAT | | POINT LENGTH | 0.045 INCHES NOMINAL | | POINT CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | SPECIAL FEATURES | SURFACE TEXTURE PER ANSI/ASME B46.1, CONICAL SURFACE OF HEAD, SHANK, FILLET, AREA AND THREAD ELEMENTS 32 RHR MAX. ALL OTHER SURFACES 125 RHR MAX; FINISH- ION VAPOR DEPOSITED ALUMINM COATING PER MIL-C-83488 TYPE II CLASS 3 WITH DRY FILM LUBE PER MIL-L-46010, TYPE I APPLIED OVER ALUMINM COATING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT |
|
|