| FASTENER LENGTH | 0.875 INCHES NOMINAL |
| HEAD DIAMETER | 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| HEAD HEIGHT | 0.184 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| INTERNAL DRIVE STYLE | HEXAGON |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CAPTIVE SCREW,HIGH PROFILE,SPRING LOADED |
| MATERIAL ACCOMMODATED THICKNESS | 0.250 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A-493 ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-W-423,CONDITION B FED SPEC SINGLE MATERIAL RESPONSE SPRING |
| MATERIAL | ALUMINUM ALLOY 6061 SLEEVE |
| MATERIAL | STEEL COMP 302 FASTENER |
| MATERIAL | STEEL COMP 302 SPRING |
| NOMINAL THREAD DIAMETER | 0.1900 INCHES |
| SPECIAL FEATURES | MIN TENSILE LBS 1,330;PUSHOUT FORCE LBS 100 |
| WIDTH ACROSS FLATS | 0.1562 INCHES MINIMUM AND 0.1587 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE I,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| SURFACE TREATMENT | ANODIZE SLEEVE |
| SURFACE TREATMENT | PASSIVATE FASTENER |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.250 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 32 |