| BEARING SURFACE OF HEAD SURFACE FINISH | 32.0 MICROINCHES |
| FASTENER LENGTH | 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| HEAD DIAMETER | 0.178 INCHES MINIMUM AND 0.183 INCHES MAXIMUM |
| HEAD HEIGHT | 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| HEAD HOLE CONFIGURATION STYLE | ROUND |
| HEAD STYLE | FILLISTER |
| HOLE DIAMETER | 0.022 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| HOLE QUANTITY | 2 |
| HOLE TYPE | DRILLED |
| INTERNAL DRIVE STYLE | OFFSET CRUCIFORM RIBBED |
| NOMINAL THREAD DIAMETER | 0.112 INCHES |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, MACHINE, FLAT FILLISTER HEAD, FULL THREAD, OFFSET CRUCIFORM |
| SCREW MATERIAL DOCUMENT AND CLASSIFICATION | AMS5731,AMS5732,AMS5737 OR AMS5853 ASSN STD SINGLE MATERIAL RESPONSE |
| SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE |
| SCREW MATERIAL | IRON ALLOY 660 |
| SCREW SURFACE TREATMENT | CADMIUM |
| SPECIFICATION/STANDARD DATA | 80205-NAS1101 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| THREAD LENGTH | 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 40 |
| THREAD SERIES DESIGNATOR | UNJC |
| THREAD SURFACE FINISH | 32.0 MICROINCHES |