| BEARING SURFACE OF HEAD SURFACE FINISH | 0.8 MICROMETERS |
| FASTENER LENGTH | 29.7 MILLIMETERS MINIMUM AND 30.3 MILLIMETERS MAXIMUM |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| HEAD HEIGHT | 3.2 MILLIMETERS MINIMUM AND 3.5 MILLIMETERS MAXIMUM |
| HEAD STYLE | HEXAGON |
| INTERNAL DRIVE STYLE | OFFSET CRUCIFORM RIBBED |
| MINIMUM TENSILE STRENGTH | 19800 NEWTONS PER SQUARE MILLIMETER |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,HEX HEAD,OFFSET CRUCIFORM,ALLOY STEEL,FULL THREAD,1100 MPA, METRIC |
| NOMINAL THREAD DIAMETER | 6.0 MILLIMETERS |
| SCREW MATERIAL DOCUMENT AND CLASSIFICATION | AMS6382 NATIONAL SPEC 1ST MATERIAL RESPONSE OR AMS6415 NATIONAL SPEC 2ND MATERIAL RESPONSE OR AMS6484 NATIONAL SPEC 3RD MATERIAL RESPONSE OR AMS6322 NATIONAL SPEC 4TH MATERIAL RESPONSE OR AMS6325 NATIONAL SPEC 5TH MATERIAL RESPONSE OR AMS6327 NATIONAL SPEC 6TH MATERIAL RESPONSE |
| SCREW MATERIAL | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 |
| SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-+416,TYPE II,CLASS 2 (8-14 UM THICK) NATIONAL SPEC SINGLE TREATMENT RESPONSE |
| SCREW SURFACE TREATMENT | CADMIUM |
| SHANK SURFACE FINISH | 0.8 MICROMETERS |
| SPECIFICATION/STANDARD DATA | 80205-NA0114 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| THREAD CLASS | 4H6H |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 29.7 MILLIMETERS MINIMUM AND 30.3 MILLIMETERS MAXIMUM |
| THREAD PITCH IN MILLIMETERS | 1.0 |
| THREAD SERIES DESIGNATOR | MJ |
| THREAD SURFACE FINISH | 0.8 MICROMETERS |
| WIDTH BETWEEN FLATS | 9.78 MILLIMETERS MINIMUM AND 10.00 MILLIMETERS MAXIMUM |