| BEARING SURFACE OF HEAD SURFACE FINISH | 0.8 MICROMETERS |
| CHAMFER ANGLE | 10.0 DEGREES MINIMUM AND 20.0 DEGREES MAXIMUM |
| EXTERNAL THREAD TOLERANCE CLASS | 4H6H |
| FASTENER LENGTH | 15.7 MILLIMETERS MINIMUM AND 16.3 MILLIMETERS MAXIMUM |
| HEAD HEIGHT | 2.2 MILLIMETERS MINIMUM AND 2.5 MILLIMETERS MAXIMUM |
| HEAD STYLE | HEXAGON |
| INTERNAL DRIVE STYLE | TORQUE SET |
| MINIMUM TENSILE STRENGTH | 1100 MEGAPASCALS |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,DUAL,WRENCHING,HEX HEAD/OFFSET CRUCIFORM,A286 CRES,FULL THREAD,1100 MPA-METRIC |
| NOMINAL THREAD DIAMETER | 4.0 MILLIMETERS |
| SCREW MATERIAL DOCUMENT AND CLASSIFICATION | NA0026 NATIONAL SPEC SINGLE MATERIAL RESPONSE |
| SCREW MATERIAL | STEEL CORROSION RESISTING |
| SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED STD SINGLE TREATMENT RESPONSE |
| SCREW SURFACE TREATMENT | PASSIVATE |
| SHANK SURFACE FINISH | 0.8 MICROMETERS |
| SPECIFICATION/STANDARD DATA | 80205-NA0067 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 15.7 MILLIMETERS MINIMUM AND 16.3 MILLIMETERS MAXIMUM |
| THREAD PITCH IN MILLIMETERS | 0.7 |
| THREAD SERIES DESIGNATOR | MJ |
| THREAD SURFACE FINISH | 0.8 MICROMETERS |
| WIDTH BETWEEN FLATS | 6.85 MILLIMETERS MINIMUM AND 7.00 MILLIMETERS MAXIMUM |