| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD DIAMETER | 0.5000 INCHES |
| THREAD QUANTITY PER INCH | 20 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.453 INCHES NOMINAL |
| FASTENER LENGTH | 1.703 INCHES NOMINAL |
| MATERIAL | IRON ALLOY 660 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 TYPE II OR VIII FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MINIMUM TENSILE STRENGTH | 17460 POUNDS PER SQUARE INCH |
| HEAD STYLE | FLAT COUNTERSUNK |
| HEAD DIAMETER | 0.959 INCHES MINIMUM |
| HEAD HEIGHT | 0.215 INCHES NOMINAL |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND |
| 101.0 DEGREES MAXIMUM |
| INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| GRIP LENGTH | 1.250 INCHES NOMINAL |
| GRIP DIAMETER | 0.4985 INCHES MINIMUM AND |
| 0.4995 INCHES MAXIMUM |
| POINT STYLE | FLAT |
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.58 INCHES NOMINAL ALL HOLES |
| SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND |
| 0.116 INCHES MAXIMUM ALL HOLES |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW MACHINE-FLAT 100 DEG HEAD CLOSE TOLERANCE SHORT THREAD OFFSET CRUCIFORM 160 KSI |