| EXTENDED WASHER THICKNESS | 0.015 INCHES MINIMUM AND 0.025 INCHES MAXIMUM |
| EXTENDED WASHER DIAMETER | 0.360 INCHES NOMINAL |
| FASTENER LENGTH | 0.597 INCHES NOMINAL |
| HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM FASTENER |
| HEAD HEIGHT | 0.112 INCHES NOMINAL |
| HEAD STYLE | HEXAGON EXTENDED WASHER |
| INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| MATERIAL ACCOMMODATED THICKNESS | 0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS-QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6322 OR EQUIV ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| MATERIAL | STEEL COMP 304 STAND-OFF |
| MATERIAL | STEEL COMP 8740 FASTENER |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | CAPTIVE SCREW |
| PROPRIETARY CHARACTERISTICS | PACS |
| MINIMUM TENSILE STRENGTH | 2000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.1900 INCHES |
| SPECIAL FEATURES | SLEEVE MTL. CRES 304, CADMIUM PLATED |
| WIDTH BETWEEN FLATS | 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE II, CLS 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE II, CLS 2 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNJF |