| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| COUNTERSINK HEIGHT | 0.125 INCHES NOMINAL |
| FASTENER LENGTH | 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM |
| HEAD DIAMETER | 0.640 INCHES MINIMUM AND 0.660 INCHES MAXIMUM |
| HEAD STYLE | FLAT COUNTERSUNK |
| INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| LOCKING FEATURE MATERIAL | STEEL COMP 1020 OR STEEL COMP 1050 |
| LOCKING FEATURE | LOCKWASHER |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,GROMMET,OFFSET CROSS RECESS 10-32 SIZE |
| NOMINAL THREAD DIAMETER | 0.1900 INCHES |
| SCREW MATERIAL | STEEL COMP 8740 |
| SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CL 3 ASSN STD SINGLE TREATMENT RESPONSE |
| SCREW SURFACE TREATMENT | CADMIUM |
| SPECIAL FEATURES | HEAT TREAT GROMMET(LOCKWASHER)125 KSI MIN UTS;GROMMET IS AT BEARING SURFACE OF SCREW HEAD AND CONTOURS THE HEAD;GROMMET THICKNESS IS 0.022/0.028 INCHES |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |