|
|
|
National Stock Number:
5305-01-627-2954
Federal Supply Class:
5305
National Item Identification Number:
016272954
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 3M927-5L11 | 76301 | THE BOEING COMPANY | | HT4069-5-11A | 56878 | SPS TECHNOLOGIES, LLC | | HT4069-5-11A | 73197 | HI-SHEAR CORPORATION | | HT4069-5-11A | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.095 INCHES MINIMUM AND 1.105 INCHES MAXIMUM THREADS | | FASTENER LENGTH | 1.219 INCHES NOMINAL | | FEATURES PROVIDED | CETYL ALCOHOL LUBRICANT | | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | GRIP LENGTH | 0.688 INCHES NOMINAL | | HEAD HEIGHT | 0.071 INCHES NOMINAL | | HEAD DIAMETER | 0.429 INCHES NOMINAL | | HEAD STYLE | FLAT CHAMFER | | HOLE CONFIGURATION STYLE | ROUND | | HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM | | HOLE QUANTITY | 1 | | HOLE TYPE | DRILLED | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | MATERIAL | NICKEL ALLOY 718 OVERALL | | NOMINAL THREAD DIAMETER | 0.3125 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW-CLOSE TOLERANCE, 100 DEG C'SUNK, HI-TORQUE, REDUCED HEAD | | POINT CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | POINT LENGTH | 0.052 INCHES NOMINAL | | POINT STYLE | FLAT | | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488 TYPE II CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ALUMINUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.531 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | THREAD QUANTITY PER INCH | 24 |
|
|