|
|
|
National Stock Number:
5305-01-623-8408
Federal Supply Class:
5305
National Item Identification Number:
016238408
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| NAS8604D10 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.980 INCHES MINIMUM AND 1.110 INCHES MAXIMUM | | GRIP LENGTH | 0.562 INCHES NOMINAL | | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | HEAD DIAMETER | 0.355 INCHES MINIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEG REDUCED HEAD, PHILLIPS RECESS, CLOSE TOLERANCE, ALLOY STEEL, SHORT THREAD | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OR AMS6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4340 OR STEEL COMP 8740 OVERALL | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SINGLE SHEAR STRENGTH | 95000 POUNDS PER SQUARE INCH | | SPECIAL FEATURES | ITEM FURNISHED WITH ONE 0.076 INCH DRILLED COTTER PIN HOLE 0.170 INCH FROM TIP; SURFACE TEXTURE FOR GRIP DIA, CONICAL SURFACE OF HEAD, THREAD FLANKS AND THREAD ROOT IS 32 MICROINCHES, ALL OTHER SURFACES IS AT 125 MICROINCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY II,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.370 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | THREAD QUANTITY PER INCH | 28 |
|
|