|
|
|
National Stock Number:
5305-01-621-1038
Federal Supply Class:
5305
National Item Identification Number:
016211038
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| PBF1165-4-16 | 27624 | SPS TECHNOLOGIES LLC |
|
Techincal Specification:
| FASTENER LENGTH | 16.355 INCHES MINIMUM AND 16.516 INCHES MAXIMUM | | GRIP LENGTH | 0.005 INCHES NOMINAL | | HEAD DIAMETER | 0.108 INCHES NOMINAL | | HEAD MAJOR DIAMETER | 0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM | | HEAD STYLE | COUNTERSUNK CYLINDRICAL CONVEX | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, HEX HEAD WITH CROSS RECESS | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | LEFT-HAND | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | THREAD QUANTITY PER INCH | 28 |
|
|