|
|
|
National Stock Number:
5305-01-618-7124
Federal Supply Class:
5305
National Item Identification Number:
016187124
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 93926-3-11X | 56878 | SPS TECHNOLOGIES, LLC | | 93926-3-11X | 80539 | SPS TECHNOLOGIES, LLC | | AIC618-3-11R | 06725 | SPS TECHNOLOGIES, LLC | | GS1009-3-11R | 1EM77 | B & B SPECIALTIES INC | | C20645-3-11R | 62206 | B & B SPECIALTIES INC | | C20645-3-11R | 81755 | LOCKHEED MARTIN CORPORATION | | VT10021-3-11R | 06710 | VALLEY-TODECO, INC. | | SF116-3-11R | 0K6Z0 | SATURN FASTENERS INC | | GS1009-3-11R | 62206 | B & B SPECIALTIES INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.050 INCHES NOMINAL | | GRIP DIAMETER | 0.2041 INCHES MINIMUM AND 0.2051 INCHES MAXIMUM | | GRIP LENGTH | 0.687 INCHES NOMINAL | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD DIAMETER | 0.258 INCHES MINIMUM AND 0.305 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT 100 DEG REDUCED HD OFFSET CRUCIFORM 132 KSI MIN SHR | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SINGLE SHEAR STRENGTH | 132000 POUNDS PER SQUARE INCH | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.363 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
|
|