|
|
|
National Stock Number:
5305-01-599-1954
Federal Supply Class:
5305
National Item Identification Number:
015991954
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 3M1170-D4-17A | 76301 | THE BOEING COMPANY | | TX1027D4-17A | 06725 | SPS TECHNOLOGIES, LLC | | TX1027D4-17A | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | TX1027D4-17A | 0PTK6 | SPS TECHNOLOGIES INC | | TX1027D4-17A | 0ZC92 | HEARTLAND PRECISION FASTENERS INC | | TX1027D4-17A | 27624 | SPS TECHNOLOGIES LLC | | TX1027D4-17A | 56878 | SPS TECHNOLOGIES, LLC | | TX1027D4-17A | 73197 | HI-SHEAR CORPORATION | | TX1027D4-17A | 80539 | SPS TECHNOLOGIES, LLC | | TX1027D4-17A | C4293 | ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.735 INCHES NOMINAL | | FASTENER LENGTH | 1.1210 INCHES MINIMUM AND | | 1.1510 INCHES MAXIMUM | | MATERIAL | STEEL COMP XM-13 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | PH13-8MOCRES MFR REF 1ST MATERIAL RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 4400 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.3859 INCHES MINIMUM AND | | 0.3948 INCHES MAXIMUM | | HEAD HEIGHT | 0.060 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | TORX | | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND | | 0.156 INCHES MAXIMUM | | GRIP LENGTH | 1.1210 INCHES MINIMUM AND | | 1.1510 INCHES MAXIMUM | | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND | | 0.2495 INCHES MAXIMUM |
|
|