|
|
|
National Stock Number:
5305-01-581-9876
Federal Supply Class:
5305
National Item Identification Number:
015819876
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| BACB30LH3D10 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.038 INCHES MINIMUM AND 1.068 INCHES MAXIMUM | | GRIP DIAMETER | 0.188 INCHES MINIMUM AND 0.189 INCHES MAXIMUM | | GRIP LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM | | HEAD DIAMETER | 0.337 INCHES MINIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEG HEAD, CROSS RECESS, 95 KSI SHEAR, SHORT THREAD, A286 NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SPECIAL FEATURES | DRILLED SHANK WITH HOLE DIAMETER BETWEEN 0.070 AND 0.075 INCHES, LOCATED BETWEEN 0.107 AND 0.127 INCHES FROM THREADED END OF BOLT | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMSQQ-P-416, TYUPE II, CLASS 2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 3A | | THREAD SERIES DESIGNATOR | UNF |
|
|