|
|
|
National Stock Number:
5305-01-579-5360
Federal Supply Class:
5305
National Item Identification Number:
015795360
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| NA0067-060026 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NA0067A060026 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| BEARING SURFACE OF HEAD SURFACE FINISH | 0.8 MICROMETERS | | FASTENER LENGTH | 9.0 MILLIMETERS MINIMUM AND 10.0 MILLIMETERS MAXIMUM | | HEAD HEIGHT | 3.2 MILLIMETERS MINIMUM AND 3.5 MILLIMETERS MAXIMUM | | HEAD STYLE | HEXAGON | | INTERNAL DRIVE STYLE | TORQUE SET | | MINIMUM TENSILE STRENGTH | 1100 MEGAPASCALS | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, DUAL, WRENCHING, HEX HEAD/OFFSET CRUCIFORM, A286 CRES, FULL THREAD, 1100 MPA-METRIC | | NOMINAL THREAD DIAMETER | 6.0 MILLIMETERS | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | A286 ASSN STD SINGLE MATERIAL RESPONSE | | SCREW MATERIAL | STEEL CORROSION RESISTING | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE | | SCREW SURFACE TREATMENT | PASSIVATE | | SHANK SURFACE FINISH | 0.8 MICROMETERS | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 26.0 MILLIMETERS NOMINAL | | THREAD PITCH IN MILLIMETERS | 1.0 | | THREAD SERIES DESIGNATOR | MJ | | THREAD SURFACE FINISH | 0.8 MICROMETERS | | WIDTH BETWEEN FLATS | 9.7 MILLIMETERS MINIMUM AND 10.0 MILLIMETERS MAXIMUM |
|
|