|
|
|
National Stock Number:
5305-01-535-8273
Federal Supply Class:
5305
National Item Identification Number:
015358273
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| BACB30LH3U15 | 06710 | VALLEY-TODECO, INC. | | BACB30LH3U15 | 06725 | SPS TECHNOLOGIES, LLC | | BACB30LH3U15 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30LH3U15 | 17943 | FEDERAL MANUFACTURING CORP | | BACB30LH3U15 | 1RC86 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30LH3U15 | 27624 | SPS TECHNOLOGIES LLC | | BACB30LH3U15 | 56878 | SPS TECHNOLOGIES, LLC | | BACB30LH3U15 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.345 INCHES NOMINAL | | FASTENER LENGTH | 1.267 INCHES MINIMUM AND | | 1.297 INCHES MAXIMUM | | MATERIAL | IRON ALLOY 660 OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.337 INCHES NOMINAL | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | GRIP LENGTH | 0.936 INCHES MINIMUM AND | | 0.938 INCHES MAXIMUM | | GRIP DIAMETER | 0.189 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEG HEAD, CROSS RECESS, 95KSI SHEAR, SHORT THREAD A286 |
|
|