|
|
|
National Stock Number:
5305-01-530-2410
Federal Supply Class:
5305
National Item Identification Number:
015302410
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 120-265E3-4 | 06725 | SPS TECHNOLOGIES, LLC | | 120-265E3-4 | 0K6Z0 | SATURN FASTENERS INC | | 120-265E3-4 | 0ZC92 | HEARTLAND PRECISION FASTENERS INC | | 120-265E3-4 | 1EM77 | B & B SPECIALTIES INC | | 120-265E3-4 | 27624 | SPS TECHNOLOGIES LLC | | 120-265E3-4 | 56878 | SPS TECHNOLOGIES, LLC | | 120-265E3-4 | 62206 | B & B SPECIALTIES INC | | 120-265E3-4 | 62384 | LFC INDUSTRIES INC. | | 120-265E3-4 | 80539 | SPS TECHNOLOGIES, LLC | | 120-265E3-4 | 97499 | BELL TEXTRON INC | | NAS5315E3-4 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.276 INCHES NOMINAL | | FASTENER LENGTH | 0.511 INCHES MINIMUM AND | | 0.541 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | A286 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OR | | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OR | | AMS-QQ-P-416, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 3180 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.376 INCHES MINIMUM AND | | 0.385 INCHES MAXIMUM | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | INTERNAL DRIVE STYLE | TORX | | SPLINE MAJOR DIAMETER | 0.155 INCHES NOMINAL | | GRIP LENGTH | 0.250 INCHES NOMINAL | | GRIP DIAMETER | 0.189 INCHES MINIMUM AND | | 0.190 INCHES MAXIMUM |
|
|