|
|
|
National Stock Number:
5305-01-516-1181
Federal Supply Class:
5305
National Item Identification Number:
015161181
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| LD111-0046 | 43999 | THE BOEING COMPANY | | LD111-0046-2506 | 43999 | THE BOEING COMPANY |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.3125 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.457 INCHES MINIMUM AND | | 0.477 INCHES MAXIMUM | | FASTENER LENGTH | 0.827 INCHES MINIMUM AND | | 0.857 INCHES MAXIMUM | | MATERIAL | STEEL COMP XM-13 OVERALL | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.578 INCHES NOMINAL | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | GRIP LENGTH | 0.365 INCHES MINIMUM AND | | 0.385 INCHES MAXIMUM | | GRIP DIAMETER | 0.3427 INCHES MINIMUM AND | | 0.3432 INCHES MAXIMUM | | SPECIAL FEATURES | THIS SCREW HAS 0.0312 IN. OVERSIZED SHANK DIA. |
|
|