|
|
|
National Stock Number:
5305-01-513-4334
Federal Supply Class:
5305
National Item Identification Number:
015134334
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| BACS12JC4A17 | 06725 | SPS TECHNOLOGIES, LLC | | BACS12JC4A17 | 0E0Z8 | AEROSPACE MANUFACTURING CORPORATION | | BACS12JC4A17 | 0ZC92 | HEARTLAND PRECISION FASTENERS INC | | BACS12JC4A17 | 1GP79 | PILGRIM SCREW CORP | | BACS12JC4A17 | 77272 | THE BOEING COMPANY | | BACS12JC4A17 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.403 INCHES MAXIMUM | | FASTENER LENGTH | 1.062 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 5853 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TY 2, CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.350 INCHES MINIMUM AND | | 0.398 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | TORX | | SPLINE MAJOR DIAMETER | 0.300 INCHES NOMINAL | | GRIP LENGTH | 0.649 INCHES MINIMUM AND | | 0.669 INCHES MAXIMUM | | GRIP DIAMETER | 0.248 INCHES MINIMUM AND | | 0.249 INCHES MAXIMUM | | PART NAME ASSIGNED BY CONTROLLING AGENCY | (INAVY) SCREW, 100 DEGREE SIX LOBE REDUCED HEAD, TENSION, CLOSE TOLERANCE3 |
|
|