|
|
|
National Stock Number:
5305-01-512-6144
Federal Supply Class:
5305
National Item Identification Number:
015126144
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 3224515-1 | 32865 | DRS NETWORK & IMAGING SYSTEMS LLC | | 3224515-1 | 4LE72 | DRS SENSORS & TARGETING SYSTEMS OPTRONICS DIV | | 3224515-1 | 8R639 | CENTURY FASTENERS CORP | | 3224515-1 | 96214 | RAYTHEON COMPANY |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.165 INCHES MINIMUM AND | | 0.185 INCHES MAXIMUM | | FASTENER LENGTH | 0.500 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | FLAT CHAMFER | | HEAD DIAMETER | 0.266 INCHES NOMINAL | | HEAD HEIGHT | 0.162 INCHES NOMINAL | | INTERNAL DRIVE STYLE | HEXAGON | | WIDTH ACROSS FLATS | 0.140 INCHES MINIMUM AND | | 0.142 INCHES MAXIMUM | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FIRST DIAMETER FROM HEAD | 0.115 INCHES MINIMUM AND | | 0.121 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.325 INCHES NOMINAL | | SPECIAL FEATURES | ALTERED FROM MS16995-26 |
|
|