|
|
|
National Stock Number:
5305-01-438-6314
Federal Supply Class:
5305
National Item Identification Number:
014386314
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| 3140087-42 | 14438 | NYLOK LLC | | 3140087-42 | 26233 | NYLOK LLC | | 3140087-42 | 5M496 | N-D INDUSTRIES | | A3140087-42 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| COUNTERSINK ANGLE | 90.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM | | EXTERNAL THREAD TOLERANCE CLASS | 6G | | FASTENER LENGTH | 11.2 MILLIMETERS MINIMUM AND 12.0 MILLIMETERS MAXIMUM | | HEAD DIAMETER | 3.90 MILLIMETERS MINIMUM AND 4.40 MILLIMETERS MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE II | | LOCKING FEATURE MATERIAL DOCUMENT AND CLASSIFICATION | L-P-410 6/6 MIL STD SINGLE MATERIAL RESPONSE | | LOCKING FEATURE MATERIAL | PLASTIC POLYCARBONATE | | LOCKING FEATURE | PATCH | | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 2.2 MILLIMETERS | | SCREW MATERIAL | STEEL COMP 303 | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AQQ-P-35 MIL STD SINGLE TREATMENT RESPONSE | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 MIL SPEC SINGLE MATERIAL RESPONSE OR FED-STD-66 MIL SPEC SINGLE MATERIAL RESPONSE | | SCREW SURFACE TREATMENT | PASSIVATE | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 10.50 MILLIMETERS MINIMUM AND 11.30 MILLIMETERS MAXIMUM | | THREAD PITCH IN MILLIMETERS | 0.45 | | THREAD SERIES DESIGNATOR | M |
|
|