|
|
|
National Stock Number:
5305-01-438-0367
Federal Supply Class:
5305
National Item Identification Number:
014380367
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 10335384 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | NAS1581C6T21 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 MIL SPEC ALL TREATMENT RESPONSES OVERALL | | MINIMUM TENSILE STRENGTH | 7200 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT | | HEAD DIAMETER | 0.5149 INCHES MINIMUM AND | | 0.5662 INCHES MAXIMUM | | HEAD HEIGHT | 0.081 INCHES NOMINAL | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | GRIP LENGTH | 1.302 INCHES MINIMUM AND | | 1.322 INCHES MAXIMUM | | GRIP DIAMETER | 0.3735 INCHES MINIMUM AND | | 0.3745 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.3750 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.594 INCHES NOMINAL | | FASTENER LENGTH | 1.829 INCHES MINIMUM AND | | 1.859 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | A-286 AMS5731,5732,5737,5853 ASSN STD ALL MATERIAL RESPONSES OVERALL |
|
|