|
|
|
National Stock Number:
5305-01-433-8464
Federal Supply Class:
5305
National Item Identification Number:
014338464
Description:
SCREW,SHOULDER
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 IN.) (1.5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is designed to be driven with either a wrench or an inserted driver or both in sizes below No. 10 (0.190 IN.) (5 mm) nominal diameter. No. 10 (0.190 IN.) (5 mm) and larger sizes must be designed for any type of inserted driver, but may also provide for external wrenching of the head. A locking feature may be incorporated in the design of the head or threads. For items which are both shouldered and have an externally relieved body, use SCREW, EXTERNALLY RELIEVED BODY. For items with a No. 10 (0.190 IN.) (5 mm) or larger thread diameter without an inserted driver head, use BOLT, SHOULDER. Excludes BOLT, INTERNAL WRENCHING and SCREW, CAP, SOCKET HEAD.
|
Manufacturer Information:
| 10340269 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | MS51576-5 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| FASTENER LENGTH | 0.687 INCHES NOMINAL | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL | | HEAD DIAMETER | 0.218 INCHES MINIMUM AND 0.281 INCHES MAXIMUM | | HEAD HEIGHT | 0.093 INCHES MINIMUM AND 0.156 INCHES MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | INTERNAL DRIVE STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A493 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-7 OR STEEL COMP 303 OVERALL | | NOMINAL THREAD DIAMETER | 0.112 INCHES | | SHOULDER DIAMETER | 0.1235 INCHES MINIMUM AND 0.1245 INCHES MAXIMUM FIRST SHOULDER | | SHOULDER SHAPE | ROUND FIRST SHOULDER | | SHOULDER LENGTH | 0.372 INCHES MINIMUM AND 0.378 INCHES MAXIMUM FIRST SHOULDER | | WIDTH ACROSS FLATS | 0.078 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.125 INCHES MINIMUM AND 0.187 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) | | THREAD QUANTITY PER INCH | 40 |
|
|