|
|
|
National Stock Number:
5305-01-430-5480
Federal Supply Class:
5305
National Item Identification Number:
014305480
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| NAS1580A4T13Y | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.200 INCHES MINIMUM AND 1.230 INCHES MAXIMUM | | GRIP DIAMETER | 0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM | | GRIP LENGTH | 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM | | HEAD DIAMETER | 0.464 INCHES MINIMUM AND 0.507 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL | | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD LENGTH | 0.378 INCHES MINIMUM AND 0.428 INCHES MAXIMUM | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
|
|