5305-01-430-2100, SCREW,MACHINE

5120-01-430-2099 WRENCH,SOCKET

National Stock Number:
5305-01-430-2100

Federal Supply Class:
5305

National Item Identification Number:
014302100

Description:
SCREW,MACHINE

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.

Manufacturer Information:

2557242

06848

HONEYWELL INTERNATIONAL INC

Techincal Specification:

BEARING SURFACE OF HEAD SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE
BEARING SURFACE OF HEAD SURFACE TREATMENT	PASSIVATE
FASTENER LENGTH	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
HARDNESS RATING	32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
HEAD LENGTH	0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD HEIGHT	0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD STYLE	SPADE
HEAD SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE
HEAD SURFACE TREATMENT	PASSIVATE
INTERNAL DRIVE STYLE	W/O INTERNAL DRIVE
PART NAME ASSIGNED BY CONTROLLING AGENCY	SCREW,RETAINING,CUTOFF VALVE SEAT
NOMINAL THREAD DIAMETER	0.190 INCHES
NONSTANDARD THREAD PITCH DIAMETER	+0.1587 TO 0.1597 INCHES
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	AMS5643 ASSN STD SINGLE MATERIAL RESPONSE
SCREW MATERIAL	STEEL COMP 630
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE
SCREW SURFACE TREATMENT	PASSIVATE
SHANK SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE
SHANK SURFACE TREATMENT	PASSIVATE
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.395 INCHES MINIMUM AND 0.425 INCHES MAXIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
WIDTH BETWEEN FLATS	0.175 INCHES MINIMUM AND 0.205 INCHES MAXIMUM

Click here to Register for Free 30-day Trial