5305-01-421-7538, SCREW,CLOSE TOLERANCE

7644-01-421-7539 DIGITAL GEOSPATIAL PRODUCTS

National Stock Number:
5305-01-421-7538

Federal Supply Class:
5305

National Item Identification Number:
014217538

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

NAS1580C4R16D

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

THREAD SERIES DESIGNATOR	UNJF
NOMINAL THREAD DIAMETER	0.250 INCHES
THREAD QUANTITY PER INCH	28
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.403 INCHES NOMINAL
FASTENER LENGTH	1.388 INCHES MINIMUM AND
	1.418 INCHES MAXIMUM
MATERIAL	IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR
	AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR
	AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
HEAD STYLE	FLAT COUNTERSUNK
HEAD DIAMETER	0.464 INCHES MINIMUM AND
	0.506 INCHES MAXIMUM
COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND
	101.0 DEGREES MAXIMUM
INTERNAL DRIVE STYLE	TORQUE-SET RIBBED
GRIP LENGTH	0.990 INCHES MINIMUM AND
	1.010 INCHES MAXIMUM
GRIP DIAMETER	0.2490 INCHES MINIMUM AND
	0.2495 INCHES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.287 INCHES NOMINAL FIRST HOLE
SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND
	0.086 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA	80205-NAS1580 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

Click here to Register for Free 30-day Trial