|
|
|
National Stock Number:
5305-01-417-4554
Federal Supply Class:
5305
National Item Identification Number:
014174554
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 11825D4-23 | 59563 | REID PRODUCTS INC. | | 11845D4-23 | 59563 | REID PRODUCTS INC. | | TX1027D4-23 | 06725 | SPS TECHNOLOGIES, LLC | | 3M1170D4-23 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| 0.386 INCHES MAXIMUM | | HEAD HEIGHT | 0.060 INCHES NOMINAL | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE II | | GRIP LENGTH | 1.428 INCHES MINIMUM AND | | 1.448 INCHES MAXIMUM | | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND | | 0.2495 INCHES MAXIMUM | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.425 INCHES NOMINAL | | FASTENER LENGTH | 1.848 INCHES MINIMUM AND | | 1.878 INCHES MAXIMUM | | MATERIAL | STEEL COMP XM-13 OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SINGLE SHEAR STRENGTH | 125000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT | | HEAD DIAMETER | 0.358 INCHES MINIMUM AND |
|
|