|
|
|
National Stock Number:
5305-01-414-4188
Federal Supply Class:
5305
National Item Identification Number:
014144188
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 124379-7-32 | 56878 | SPS TECHNOLOGIES, LLC | | BPF1475-7-32 | 27674 | ACUITY SPECIALTY PRODUCTS, INC | | VCL0009-7-32 | 06710 | VALLEY-TODECO, INC. | | GB510FG7-32 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | GB510FG7-32 | 27624 | SPS TECHNOLOGIES LLC | | GB510FG7-32 | 80539 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.437 INCHES | | THREAD QUANTITY PER INCH | 20 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.594 INCHES NOMINAL | | FASTENER LENGTH | 2.588 INCHES MINIMUM AND | | 2.615 INCHES MAXIMUM | | MATERIAL | NICKEL ALLOY 718 OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.826 INCHES MINIMUM AND | | 0.888 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | TORQUE-SET RIBBED | | GRIP LENGTH | 1.990 INCHES MINIMUM AND | | 2.010 INCHES MAXIMUM | | GRIP DIAMETER | 0.4677 INCHES MINIMUM AND | | 0.4682 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES HEAD | | 32.0 MICROINCHES GRIP | | 32.0 MICROINCHES THREADS | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
|
|