|
|
|
National Stock Number:
5305-01-413-3317
Federal Supply Class:
5305
National Item Identification Number:
014133317
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 124379-5-31 | 56878 | SPS TECHNOLOGIES, LLC | | 12439-5-31 | 56878 | SPS TECHNOLOGIES, LLC | | VCL0009-5-31 | 06710 | VALLEY-TODECO, INC. | | GB510FG5-31 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | PBF1475-5-31 | 27624 | SPS TECHNOLOGIES LLC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 2.391 INCHES MINIMUM AND 2.438 INCHES MAXIMUM | | GRIP DIAMETER | 0.3276 INCHES MINIMUM AND 0.3432 INCHES MAXIMUM | | GRIP LENGTH | 2.397 INCHES MINIMUM AND 2.417 INCHES MAXIMUM | | HEAD DIAMETER | 0.578 INCHES MINIMUM AND 0.634 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | TORQUE-SET RIBBED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY K-500 OVERALL | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES HEAD | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.469 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 24 |
|
|