5305-01-399-2043, SCREW,CAP,HEXAGON HEAD

5365-01-399-2042 BUSHING,MACHINE THREAD

5310-01-399-2044 WASHER,FLAT

National Stock Number:
5305-01-399-2043

Federal Supply Class:
5305

National Item Identification Number:
013992043

Description:
SCREW,CAP,HEXAGON HEAD

Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.

Manufacturer Information:

FF-S-85	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS51109-167	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

THREAD SERIES DESIGNATOR	UNC
THREAD LENGTH	1.740 INCHES NOMINAL
FASTENER LENGTH	3.406 INCHES MINIMUM AND
	3.500 INCHES MAXIMUM
MATERIAL	STEEL COMP 410 OR
	STEEL COMP 416 OR
	STEEL COMP 430 OVERALL
HEAD STYLE	HEXAGON
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD DIAMETER	0.375 INCHES
THREAD QUANTITY PER INCH	10
THREAD CLASS	2A
MATERIAL DOCUMENT AND CLASSIFICATION	FED STD 66 FED STD ALL MATERIAL RESPONSES OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING	235.0 BRINELL B MAXIMUM OVERALL
MINIMUM TENSILE STRENGTH	70000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH	40000 POUNDS PER SQUARE INCH
HEAD HEIGHT	0.455 INCHES MINIMUM AND
	0.483 INCHES MAXIMUM
WIDTH BETWEEN FLATS	1.100 INCHES MINIMUM AND
	1.125 INCHES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	3.197 INCHES MINIMUM AND
	3.271 INCHES MAXIMUM GRIP
SHANK UNTHREADED HOLE DIAMETER	0.140 INCHES NOMINAL GRIP
NONDEFINITIVE SPEC/STD DATA	1 TYPE AND
	10P STYLE
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE	81348
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	FF-S-85
MANUFACTURERS CODE	96906
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	MS51109-167

Click here to Register for Free 30-day Trial