|
|
|
National Stock Number:
5305-01-393-5604
Federal Supply Class:
5305
National Item Identification Number:
013935604
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 93926-3-11 | 56878 | SPS TECHNOLOGIES, LLC | | 93926-3-11 | 80539 | SPS TECHNOLOGIES, LLC | | AIC618-3-11 | 06725 | SPS TECHNOLOGIES, LLC | | C20645-3-11 | 0K6Z0 | SATURN FASTENERS INC | | GS1009-3-11 | 1EM77 | B & B SPECIALTIES INC | | C20645-3-11 | 81755 | LOCKHEED MARTIN CORPORATION | | VT10021-3-11 | 06710 | VALLEY-TODECO, INC. |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.363 INCHES NOMINAL | | FASTENER LENGTH | 1.006 INCHES MINIMUM AND | | 1.066 INCHES MAXIMUM | | MATERIAL | STEEL COMP H11 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | SINGLE SHEAR STRENGTH | 132000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.228 INCHES MINIMUM AND | | 0.288 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | GRIP LENGTH | 0.643 INCHES MINIMUM AND | | 0.703 INCHES MAXIMUM | | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND | | 0.1895 INCHES MAXIMUM | | SPECIAL FEATURES | FINISH CADMIUM FLUOBORATE PLATE | | PART NAME ASSIGNED BY CONTROLLING AGENCY | 100 DEGREE REDUCED FLUSH HEAD, OFFSET CRUCIFORM RECESS, 132 KSI SHEAR |
|
|