5305-01-387-8553, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-387-8553

Federal Supply Class:
5305

National Item Identification Number:
013878553

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

801292-1

73030

HAMILTON SUNDSTRAND CORPORATION

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.410 INCHES MINIMUM AND 0.420 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.145 INCHES MINIMUM AND 0.149 INCHES MAXIMUM
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD HEIGHT	0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE	FLAT CHAMFER
INTERNAL DRIVE STYLE	HEXAGON
MATERIAL	STEEL OVERALL
MINIMUM TENSILE STRENGTH	16000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH	130000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
SPECIAL FEATURES	ALTERED ITEM MAKE FROM MS16998-28
WIDTH ACROSS FLATS	0.156 INCHES MINIMUM AND 0.158 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY2CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD LENGTH	0.174 INCHES MINIMUM AND 0.215 INCHES MAXIMUM
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNF

Click here to Register for Free 30-day Trial