|
|
|
National Stock Number:
5305-01-380-8023
Federal Supply Class:
5305
National Item Identification Number:
013808023
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 7010503-002 | 12436 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | 7010503-002 | 17446 | HUCK INTERNATIONAL, INC | | DPYE7900P6A2 | 0HDW7 | HUCK INTERNATIONAL, INC. | | FT1066P6-1-2B | 58794 | FASTENER TECHNOLOGY CORP | | DPYE7900P6A2 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | FASTENER LENGTH | 0.395 INCHES MINIMUM AND | | 0.425 INCHES MAXIMUM | | MATERIAL | COPPER ALLOY 360 STAND-OFF | | STEEL COMP 4037 AND | | STEEL COMP 8740 FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B16, HALF HARD ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 4610 ASSN STD SINGLE MATERIAL RESPONSE STAND-OFF | | AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR | | MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE FASTENER | | SURFACE TREATMENT | OXIDE STAND-OFF | | OXIDE FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF | | MIL-C-13924, CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE FASTENER | | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND | | 38.0 ROCKWELL C MAXIMUM OVERALL | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.231 INCHES MINIMUM AND | | 0.317 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE III | | MATERIAL ACCOMMODATED THICKNESS | 0.075 INCHES MINIMUM AND | | 0.089 INCHES MAXIMUM |
|
|