|
|
|
National Stock Number:
5305-01-380-0761
Federal Supply Class:
5305
National Item Identification Number:
013800761
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 330-1853-010 | 13499 | ROCKWELL COLLINS, INC. | | 330-1853-010 | 51792 | APOLLO AEROSPACE COMPONENTS LLC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.086 INCHES | | THREAD QUANTITY PER INCH | 56 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.109 INCHES NOMINAL | | FASTENER LENGTH | 0.282 INCHES MINIMUM AND | | 0.312 INCHES MAXIMUM | | MATERIAL | STEEL COMP 303 OR | | STEEL COMP 303SE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.143 INCHES MINIMUM AND | | 0.172 INCHES MAXIMUM | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE II | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FIRST DIAMETER FROM HEAD | 0.058 INCHES MINIMUM AND | | 0.063 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.203 INCHES NOMINAL |
|
|